Power Fist 2525DA User Manual

1
TABLE OF CONTENTS
SECTION PAGE
1 GENERAL INFORMATION 2
2 SAFETY GUIDELINES 3
3 COMPONENTS & CONTROLS 4
3.1 How The Pressure Washer Works 4
3.2 Controls 5
4 ASSEMBLY INSTRUCTIONS 7
4.1 Assembly for Item 8102477 7
4.2 Assembly for Item 8038317 8
4.3 Assembly for Item 8186322 8
4.4 Assembly for Item 8038382 8
4.5 Assembly for Item 8186306 9
4.6 Assembly for Item 8093254 10
4.7 Assembly for Item 8093247 11
4.8 Assembly for Item 8093270 12
4.9 Assembly for Item 8093262 13
4.10 Assembly for Item 8186751 14
4.11 Hose Reel Installation 15
5 OPERATION 16
5.1 Water Connections 16
5.2 Before Starting Your Pressure Washer 16
5.3 Prime The Pump 17
5.4 Starting/Stopping The Pressure Washer 17
5.5 Washing 18
5.6 Chemical Additives 19
5.7 Determining Chemical Additive-to-Water Ratio 19
5.8 Storage 20
5.9 Washing Tips 20
6 MAINTENANCE 21
6.1 Maintenance Safety 21
6.2 Preventative Maintenance 21
6.2.1 Anti-Freezing The Pressure Washer (Winterizing) 21
6.2.2 Routine Inspection 22
6.2.3 Pulley Alignment & Belt Tension (for items 8093262
& 8186751)
22
7 TROUBLESHOOTING 24
8 SPECIFICATIONS 25
9 ASSEMBLY PART LISTS 28

Power Fist 2525DA Specifications

General

Maximum Pressure	2500 PSI
Engine Type	Gasoline
Engine Displacement	196cc
Engine Power	6.5 HP
Pump Type	Axial Cam
Hose Length	25 ft

Summary

Safety Guidelines

Critical Safety Instructions

Essential instructions to read before operating or maintaining the pressure washer.

Specific Hazard Warnings

Details risks of fire, burns, breathing, high pressure fluids, and general injury.

Components & Controls

Key Control Components Overview

Nozzle Selection Guide

Assembly Instructions

Model-Specific Assembly Steps

Operation

Water Connections and Pre-Start Checks

Covers connecting water supply and essential checks before starting the unit.

Priming and Starting/Stopping Procedures

Details how to prime the pump and correctly start and stop the pressure washer.

Washing Procedures and Safety

Guidelines for the washing process, including trigger use and safety precautions.

Using Chemical Additives and Calibration

Maintenance

Maintenance Safety Precautions

Anti-Freezing Procedures (Winterizing)

Routine Inspection Schedule

Pulley Alignment and Belt Tension

Troubleshooting

Common Problems and Solutions

Lists common issues like engine not running, pressure loss, and provides solutions.