To Next Page
J
Jamie NelsonAug 1, 2025
What to do if my Power Fist 8102048 is not pumping?
- MmarissabrownAug 1, 2025
If your Power Fist Water Pump isn't pumping water, there are several potential causes: * There may not be enough water to prime the pump. Add more water to the pump. * The inlet pipe may have a leak. Check the inlet pipe and its connections, then replace the pipe or tighten the connections. * The pump speed may be too low. Check the speed and determine the cause for remedy. * The filter may be obstructed. Check and clean the filter. * The pump's capacity may be exceeded. Check the installation position. * The seal may be worn and leaking air. Replace the machinery seal.
General
