To Next Page
W
Willie HansenJul 26, 2025
Why does my Power Fist Air Reciprocating Saw lose power?
- VvedwardsJul 26, 2025
If your Power Fist Saw loses power or performs erratically, first check your air supply. Make sure the saw is connected to a 3/8 inch I.D. or larger air hose without any kinks or blockages, and that all fittings are properly connected. Also, ensure the saw is connected to a compressor with a flow rate that matches the tool's requirements. The issue might be an excessive drain on the air line, moisture or a restriction in the air hose, or incorrect size/type of hose connectors. Also, the air compressor may have insufficient flow.
General
