Power works STF401 - English; Table of Contents

1 Description......................................... 4
1.1 Purpose.............................................................. 4
1.2 Overview........................................................... 4
2 Safety.................................................. 4
3 Installation......................................... 4
3.1 Unpack the machine.......................................... 4
3.2 Attach the guard.................................................4
3.3 Assemble the shaft.............................................4
3.4 Attach the auxiliary handle................................5
3.5 Install the battery pack.......................................5
3.6 Remove the battery pack................................... 5
4 Operation........................................... 5
4.1 Controls............................................................. 5
4.2 Start the machine............................................... 5
4.3 Stop the machine............................................... 5
4.4 Operation tips.................................................... 5
4.5 Adjust the length of the cutting line.................. 5
4.6 Adjust the cutting diameter................................5
4.7 Cutting tips........................................................ 5
5 Maintenance.......................................6
5.1 General information...........................................6
5.2 Clean the machine............................................. 6
5.3 Replace the spool...............................................6
5.4 Replace the cutting line..................................... 6
5.5 Replace the bump knob..................................... 6
5.6 Assemble the trimmer head............................... 6
5.7 Remove the trimmer head..................................7
5.8 Assemble the brush cutter..................................7
5.9 Remove the brush cutter.................................... 7
6 Transportation and storage.............. 7
6.1 Move the machine............................................. 7
6.2 Store the machine.............................................. 7
7 Troubleshooting.................................7
8 Technical data....................................8
3
English
EN