17
Charging the battery
WARNING!
Charge the battery pack only with a Briggs & Stratton
battery charger.
1. Connect the charger plug to the mains power supply. Then
insert the output plug of the charger into the socket of the
engine, the indicator will flash during the normal charging
process.
2. A completely discharged battery pack will fully charge in
approximately 4 hours.
3. When the battery pack is fully charged, the indicators will
remain on.
4. When not in use, disconnect the battery charger from the
mains power supply.
Battery capacity indication
To check the available charge, press the battery capacity
indication button. The display lights will indicate the
approximate amount of capacity remaining in the battery pack.
To Next Page
Loading...
