1. Workpiece contact
2. Low nail indicator window
3. Magazine
4. Depth adjustment
5. Jam nails remover
6. Battery pack
7. On/Off switch
8. Mode selection
9. Handle
10. Switch trigger
Accessories
18Ga nail:35/40/45/50mm 100 x each
18Ga staple:32/40mm 300 x each
Operation
NOTE: Before using the tool, read the
instruction book carefully.
This tool is designed for driving nails and
staples into wood, plastic, and other
materials.
This tool is allowed to be used only for its
prescribed purpose. Any other use is
deemed to be a case of misuse. The
To Next Page