The sound values have been determined
according to the noise test code given in EN
62841-1, using the basic standards EN ISO
11094 and EN ISO 3744.
The declared vibration value (according to
EN 62841-1) has been measured in
accordance with a standard test method,
and may be used for comparing one
product with another. The declared vibration
value may also be used in a preliminary
assessment of exposure.
WARNING: Depending on the actual
use of the product, the vibration values
can differ from the declared total.
Adopt proper measures to protect yourself
against vibration exposure. Take into
consideration the whole work process,
including times the product is running under
no load or is switched off.
WARNING! This equipment may cause
Hand-Arm Vibration Syndrome (HAVS)
if its use is not adequately monitored
and managed.
Preventative measures include, among
others, regular maintenance and care of the
product and cutting attachments, keeping
hands warm and periodical breaks, as well
as proper planning of work processes.
To Next Page