14
DIRECTIONS FOR USE
1. INSTALLING/LAUNCHING THE
POWERDOT MOBILE APPLICATION
1) Make sure your mobile device a) runs on Android 4.3
(JellyBean) or later, and b) is Bluetooth Smart Ready-
enabled.
2) Click on the Google Play application, search for the
“PowerDot” Mobile Application and install it.
3) Launch the installed PowerDot application, walk through the
on-screen Safety Briefing, then follow instructions to locate
and activate your PowerDot (or PowerDots) for first use.
1) Make sure your mobile phone a) runs on iOS 7.0 or later, and
b) is iPhone 5 or later.
2) Launch Apple App Store application, search for the
“PowerDot” Mobile Application and install it.
3) Launch the installed PowerDot application, walk through the
on-screen Safety Briefing, then follow instructions to locate
and activate your PowerDot (or PowerDots) for first use.
2. TURNING POWERDOT ON/OFF
To turn on your PowerDot device, hold down the Multifunction
Button for approximately 1 second, until you see the power light
turn on. When PowerDot is not in stimulation, you can turn it off
by pressing the Multifunction Button.
To Next Page
Loading...