PowerDot PD-01V - Page 41

41
Cycles
<5% UT (>95%
dip in UT) for
5 sec
Conducted RF
IEC 61000-4-6
3 Vrms
150 kHz to
80MHz
Not
Applicable
PowerDot PD-01 does
not connect o AC
source directly.
Radiated RF
IEC 61000-4-3
10 V/m
1.4 GHz to
2.7GHz
3 V/m
26 MHz to 1 GHz
3 V/m
3 V/m
Portable and mobile
RF communications
equipment should be
used no closer to any
part of the PowerDot
PD-01 device,
including cables, than
the recommended
separation distance
calculated from the
equation applicable to
the frequency of the
transmitter.
Recommended
separation distance:
d = 1.2 √P
d = 1.2 √P 80 MHz to
800 MHz
d = 2.3 √P 800 MHz to
2.5 GHz
Where P is the
maximum output
power rating of
the transmitter in
watts(W) according
to the transmitter
manufacturer and dis
the recommended