EasyManua.ls Logo

PowerDrive 300 - Performance and Calculations; Operating Limits and Battery Management; Power Calculation Formulas

PowerDrive 300
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Limits
Power Output:
The inverter can deliver 300 watts for about 60 minutes. The inverter must
cool for 15 minutes before it can resume operation at 300 watts.
NOTE: Operating time will vary depending upon the type, capacity charge
level of the battery, and the power draw of the AC products you are using.
With a normal vehicle battery and a 100 watt load (such as a small television)
you can expect an operating time of 2 to 3 hours. It is recommended that you
start your vehicle once an hour when using the RPPD300 for extended
periods of time to prevent draining the battery.
WARNING: To prevent personal injury or loss of life, never start or leave your
engine running in a poorly ventilated area such as a garage.
Helpful Formulas:
To Convert AMPS to WATTS: AMPS X VOLTS = WATTS
To Convert WATTS to AMPS: WATTS ÷ VOLTS = AMPS
These formulas yield a close approximation of the continuous loads of a
product.
TToo ccaallccuullaattee aapppprrooxxiimmaattee SSttaarrttuupp LLooaadd::
Multiply: WATTS X 2 = Starting Load
This formula yields a close approximation of the starting load of the
appliance, although some may require an even greater starting load. NOTE:
Induction motors such as air conditioners, refrigerators, freezers and pumps
may have a start up surge of 3 to 7 times the continuous rating. Most often
the start up load of the appliance or power tool determines whether an
inverter has the capability to power it.
For example: You have a freezer with a continuous load of 4 amps, and a start
up load of 12 amps:
4 amps x 120 volts = 480 watts continuous, 12 amps x 120 volts = 1440 watts
starting load
You would need an inverter with peak-surge rating greater than 1440 watts to
run this appliance.

Related product manuals