Do you have a question about the PowerDrive PD2000 and is the answer not in the manual?
Continuous Power | 2000W |
---|---|
Surge Power | 4000W |
Input Voltage | 12V DC |
Output Voltage | 120V AC |
Output Waveform | Modified Sine Wave |
Frequency | 60 Hz |
Protection Features | Overload, Overheat, Short Circuit, Low Voltage, High Voltage |
Covers dangers of inverter output and safe operating environments.
Covers cautions for appliance compatibility and risks of battery explosion.
Lists cautions regarding loose connections and polarity.
Explains starting vs. continuous load and how to calculate Watts.
Identifies key parts of the inverter unit.
Details the various components and functionalities of the inverter unit.
Explains how to calculate the necessary DC power input for the inverter.
Provides steps to determine the appropriate battery bank capacity.
Notes on using deep-cycle or marine-rated batteries for the inverter.
Provides a table of recommended cable gauges based on length for the inverter.
Instructions on how and where to properly mount the inverter unit.
Step-by-step guide for connecting the inverter's DC power cables.
Instructions for using the removable faceplate remote control.
Step-by-step guide for turning the inverter on, connecting appliances, and operation.
Tips to minimize signal interference when using the inverter with audio/video equipment.
Lists causes and solutions for problems related to no input voltage.
Lists causes and solutions for the inverter shutting down unexpectedly.
Addresses constant low battery alarms and TV not working with the inverter.
Explains common error codes and their corresponding solutions.
Lists detailed technical data for the PD2000 inverter.
Outlines the FCC rules and regulations the device complies with.
Details compliance with Industry Canada's licence-exempt RSSs.
Provides information on the limited warranty and how to contact customer service.
Information on app compatibility and how to download it.
Steps to initiate and set up the connection between smartphone and inverter.
Details on searching for devices and pairing them with the inverter.
Step-by-step guide for connecting and operating the app on Android phones.
Instructions on how to disconnect the paired smartphone from the inverter.
Guide on how to change or reset the inverter's connection passcode.
Detailed instructions and visual aids for resetting the inverter's passcode.
Instructions to reset the passcode if the current one is unknown.
Guide on selecting the correct input cable gauge based on distance.
Explains common error codes displayed by the inverter and how to resolve them.