Powerfix Profi 270249 - Adjusting Lighting Duration; Configuring Light Level

12 GB
Setting the lighting duration
of the device (Ill. D)
Note: the lighting duration of the device can be set from min. 10 seconds
to max 7 minutes
Turn the control knob TIME
6
in the direction „-” in order to decrease
the lighting duration of the device.
Turn the control knob TIME
6
in the direction „+“ in order to increase
the lighting duration of the device.
Note: The lighting duration is always calculated based on the
respective last movement recorded by the sensor
1
.
Setting the day light level (Ill. D)
Turn the control knob LUX
7
in the direction „ “. The sensor
1
is in
the night operation mode.
Turn the control knob LUX
7
in the direction „ “. The sensor
1
is in
the night and day operation mode.
Note: the intermediate range is for various light values.