Need help?Do you have a question about the Powerfix Profi 304990 and is the answer not in the manual?
General| Brand | Powerfix Profi |
|---|---|
| Model | 304990 |
| Category | Racks & Stands |
| Language | English |
Welcome to the new product, familiarize yourself with it before first use and refer to instructions.
Product designed for commercial drills to make defined holes at right-angles into wood, metal, and ceramic tiles.
Connect the pillar to the base plate and tighten the screw to fix it securely.
Fix the slider on the pillar and mount the lever arm onto the slider, tightening screws securely.
Mount the vise onto the base plate using the guide slots and long slots for precise positioning.
Secure the work-piece in the vise by pressing the quick-release button and tightening the locking device.
Fit the drill into the fixture, insert the bit, and adjust the slider until the drill nearly touches the work-piece.
Loosen block and locking screw, move lever arm down, read depth gauge, then retighten screw and block.
Loosen vise screws, adjust work piece position, mark drilling point, and retighten vise securely.
Store hexagon key, keep product dry and clean, and lightly grease moving metal parts to prevent rust.
Dispose of packaging at local recycling facilities and contact local authorities for worn-out product disposal.
To Next Page
