7
GB
Adjusting the work piece
Loosen the fixing screws of the vise
13
.
Adjust the vise with the work piece by sliding
it into position.
Mark the exact position and punch a drilling
point on the work-piece. Retighten the vise
(see Fig.J).
Storage and care
Store the hexagon key in the fixture on the
slider.
Store the product in a dry place, out of the
reach of children.
Clean the product with a damp cloth.
Lightly grease the moving parts, rub the plain
metal parts with an oily cloth to protect them
from rust.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.
To Next Page
Loading...
Need help?
General
