Powerfix Profi PUTK 50 A1 User Manual

■ 2
│
GB
│
IE
│
NI
PUTK 50 A1
Introduction
Information about these operating instructions
Congratulations!
You have purchased a high-quality product. Familiarise yourself with the product
before using it. To do this, read the following operating instructions thoroughly.
Use the product only as described and for the range of applications specified.
Keep these operating instructions in a safe place. Please, also pass all associated
documents on to any future owner(s).
Proper use
This product is designed exclusively for transporting loads in domestic households.
The product is not designed for use on stairways or steep terrain and is not in-
tended for the transportation of humans or live animals. Commercial or industrial
use is not permitted. No liability will be assumed in cases of improper use.
No liability will be assumed for damage caused by misuse or improper handling,
the use of force or unauthorised modification. The risk shall be borne solely by
the user.
Technical details
Dimensions
Loading surface approx. 23 x 25 cm
Weight
Maximum load
50
KG
max.
50 kg
Empty weight approx. 1.65 kg
Fastening bungee
Maximum permissible tensile force F
perm.
300 N
Total length on reaching the F
perm.
130 cm
Safety
■ WARNING! There is a risk of injury and property damage!
– Do not wrap the fastening bungee over sharp edges or corners!
– It must not be used for lifting loads!
– Caution! Do not use the fastening bungee to secure the load!
– Do not use the fastening bungee if it is damaged.
– Overloading the fastening bungee can cause it to tear and snap back, which
can be dangerous!
– Maximum permissible tensile force Fperm. is 300 N.

Powerfix Profi PUTK 50 A1 Specifications

General

Brand	Powerfix Profi
Model	PUTK 50 A1
Category	Lifting Systems
Language	English