- 25 -
Appliance description
1
Indentation = here is where the measuring tape starts with „0”
2
Measuring tape
3
Water glasses for spirit level function
4
Digital display
5
Button „Laser + Display on” – „Laser out” – „Display out”
6
Release button for the measuring tape
7
Battery compartment
8
Laser exit opening
Inserting the batteries
• Open the battery compartment
7
and insert two batteries as
shown in the diagramme. Close the battery compartment.
The appliance is now ready for use.
• When the battery symbol appears in the digital display
4
,
replace the batteries as described in the technical data.
Utilisation
Digital Laser Tape Measure – Switching On/Off
• Press on the button
5
– once, to switch on the digital display
4
and the laser.
– twice, to switch the laser back off.
– three times, to also switch the digital display
4
back off.
To Next Page
Loading...
