LV710 Freight Camera - Dry Van Swing Door Installation
Revised: 05/23/19 23
20. Drill a 3/16” hole through the door at location marked for lens in step #5.
21. Remove any sheathing disc from interior door surface.
f. Using a 3 3/8 hole saw drill through inner door sheathing at location of 3/16” hole drilled in
step #6.
g. Avoid letting hole saw teeth to cut into door core.
h. Remove sheathing disc by prying off with flat blade screwdriver.
Drill 3 3/8” hole through interior door sheathing
To Next Page
Loading...