EasyManua.ls Logo

Powergen Sirius - Mains Voltage Setting; Auxiliary Transformer Connection

Powergen Sirius
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTRUCTIONS MANUAL SIRIUS
RELEASE. N.0_M 18_04_06
POWERGEN S.R.L. VIA XXV APRILE , 5 LOC. CORSALONE CHIUSI DELLA VERNA (AREZZO)
) +39-(0)575-531015 - Telefax +39-(0)575-511891 E mail borri@elledi.it
www.batterychargerpowergen.it P.Iva 01572290516 - 6 -
3. MAINS VOLTAGE SETTING
q During the installation (or after a displacement) we recommend to check the actual value of the mains
voltage, if found high or low compared with the rated values, may cause problems due to a higher or
lower delivery of current during the charge.
q As a result, check this value and adjust it, if needed, via the ADJUSTING PLUGS placed in the terminal
board on the transformer.
q Such control is to be carried out by qualified staff and/or by service centres.
WARNING
Connect the auxiliary
Transformer at 230-240V
WARNING
Connect the auxiliary
Transformer at 400-415V
WARNING

Related product manuals