24
Storage Procedure
1. Drain the carburetor by loosening the drain screw. Drain the gasoline into a suitable
container.
WARNING: Gasoline is extremely flammable and is explosive under certain conditions.
Perform this task in a well ventilated area with the engine stopped. Do not
smoke or allow flames or sparks in the area during this procedure.
DRAIN SCREW
2. Change the engine oil.
3. Remove the spark plug, and pour about a tablespoon of clean engine oil into the cylinder.
Crank the engine several revolutions to distribute the oil, then reinstall the spark plug.
4. Slowly pull the starter grip until resistance is felt. At this point, the piston is coming up on its
compression stroke and both the intake and exhaust valves are closed. Storing the engine
in this position will help to protect it from internal corrosion.
Align the notch on the starter pulley
with the hole at the to
To Next Page
Loading...
