PowerLite
®
1761W/1771W/1776W
Quick
Setup
Before using the
projector,
make sure you read the safety instructions in
the
online User’
s
Guide
.
C
onne
c
t
the
p
r
o
j
e
c
t
o
r
Choose from the
following
connections.
See
the sections below or the
online
User's Guide for
details.
Camera, USB device, or EPSON
Document Camera
DC-06
Connect a
digital
camera,
USB
flash drive,
USB
storage device, or EPSON
document camera DC-06 to the
projector’
s
USB
TypeA (flat)
port.
Computer
USB
port
VGA
cable
USB
cable
HDMI
cable
If you connect a
digital
camera,
USB
flash drive, or
USB
storage device, you can
use the
projector’
s
Slideshow feature to project images.
See
the online User’
s
Guide for
details.
Turn on your
equ
i
p
m
en
t
Connect the square end of a
USB
cable to the
projector’
s
USB
T
ypeB
(square) port. Connect the flat end of the cable to any
USB
port on
your
computer
.
Windows
®
2000 SP4 or later: After
turning
on the
projector,
follow
the on-screen instructions to install the
EPSON
®
USB
Display
software
(
EMP_UDSE.EXE
;
only on first
connection).
Note: If the software screen does not display
automatically,
open
My
Computer
or
Computer
,
then double-click EPSON_PJ_UD.
Mac OS X 10.5.1 or higher: After
turning
on the
projector,
the setup
folder
for
USB
Display appears in the Finder. Double-click USB Display
Installer
and
follow
the on-screen instructions to install the
EPSON USB
Display
software
(only on first
connection).
Monitor port
Connect one end of a VGA cable to the
projector’
s
Computer
port, and
the
other end to your
computer’
s
monitor
port. If you are using a
laptop,
switch
it
to external display (see
“Troubleshooting”).
You can also connect
an
audio cable.
HDMI
port
Connect one end of an HDMI cable to the
projector’
s
HDMI port and the
other
end to an HDMI port on your
computer
.
Note: To connect a Mac that includes only a Mini DisplayPort or Mini-DVI
port
for video
output,
you need to obtain an adapter that allows you to connect
to
the
projector’
s
HDMI port. Contact Apple for
compatible
adapter options.
Older
Mac computers (2009 and earlier) may not support audio
through
the
HDMI
port.
Video
device
Connect up to 3 video devices and use the Source Search
button
on
the
projector
or remote control to switch between
them.
1
Turn on your computer or video source.
2
Plug in the
projector.
The power light on the
projector
turns
orange.
3
Open the A/V
Mute
slide all the
way
.
4
Press
the power
button
on the
projector
or remote control. The
projector
beeps, the power light flashes green, and then stays
on.
RCA video cable (composite video)
Component video to VGA
cable
Audio
cable
HDMI
cable
Note: To shut down the
projector,
press the power
button
twice,
then
unplug it. You
don’t
have to wait for the
projector
to cool
down.
5
The
default
language of the menu system is English. To select
another
language, press the Menu
button
on the remote control. Select
Extended
and press
. Select Language and press . Select
your
language and press .
Press
the Menu
button
to exit the menu system.
*412280900*
*412280900*
To Next Page
Need help?
General
