PowerMate
Operation Manua
CHARGING SAFETY INSTRUCTIONS continued
CAUTION: Do not operate the PowerMate
unit while connected to the charger.
Do not overload wall outlets or extension cords, as this can result in a risk of fire or
electrical shock.
Do not operate charger if it has received a sharp blow, been dropped, or otherwise
damaged in anyway.
To reduce risk of electrical shock, unplug the charger from the outlet before
attempting maintenance or cleaning.
Disconnect the power plug by pulling the plug, not the cord.
Do not handle the plug with wet hands.
Unplug the charger when not in use.
12V IN-
EHICLE CHARGER
WARNING: The In-vehicle charger cannot protect against vehicle damage caused
by faults in the wiring from the vehicle battery to the charger or faults in any other
portion of the vehicle wiring harness. The user must ensure that the wiring to the
charger adheres to the same vehicle wiring standards and safety precautions
required for all vehicle wiring.
BATTERY CHARGER
PN 400211B
IN-VEHICLE REMOTE
BATTERY CHARGER
PN 400218C
2.09
PN 010160 Rev.G
Eng. 04/ 18/ 18
To Next Page
Loading...
Need help?
General
