Powermatic 75 - Specifications

7
Motor .................................................................................................. 3 HP, 1 Ph, 230V
.................................................................. 3 HP, 3 Ph, 230/460V (prewired 230V)
CFM ........................................................................................................................ 1900
Capacity ........................................................................................................... 10 cu. ft.
Upper dust bag ....................................................................................................... cloth
Lower dust bag ........................................................................................... clear plastic
Switch ......................................................................................... industrial push button
Height ........................................................................................................................ 90"
Inlet sizes............................................................................. one-8", one-6", or three-4"
Casters........................................................................................................... four swivel
Weight (gross) ..............................................................................................154.32 lbs.
SPECIFICATIONS: Model 66, 10" Table Saw
NOTE: The above specifications were current at the time this manual was published, but because of our policy
of continuous improvement, Powermatic reserves the right to change specifications without notice and without
incurring obligations.