Powerplus POWX0910 - English

POWX0910 EN
Copyright © 2021 VARO P a g e | 1 www.varo.com
1 APPLICATION ................................................................................ 3
2 DESCRIPTION (FIG A) ................................................................... 3
3 PACKAGE CONTENT LIST ............................................................ 3
4 SYMBOLS ....................................................................................... 3
5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 4
5.1 Working area .......................................................................................................... 4
5.2 Electrical safety ..................................................................................................... 4
5.3 Personal safety ...................................................................................................... 4
5.4 Power tool use and care ........................................................................................ 5
5.5 Service .................................................................................................................... 5
6 MACHINE-SPECIFIC SAFETY WARNINGS .................................. 5
7 ASSEMBLY ..................................................................................... 6
7.1 Inserting and removing a cutter (Fig. 1) ............................................................... 6
7.1.1 Inserting a cutter ...................................................................................................... 6
7.1.2 Removing a cutter .................................................................................................... 6
7.2 Depth adjustment (Fig. 2) ...................................................................................... 7
7.3 Locking lever (13) for cutting machine body ....................................................... 7
7.4 Mounting and adjusting the parallel guide (Fig. 4) .............................................. 7
7.5 Fitting the centre point (Fig. 5) .............................................................................. 7
7.6 Dust extraction outlet (Fig. 6)................................................................................ 7
7.7 Using the dust exhaust connection ...................................................................... 8
8 OPERATION.................................................................................... 8
8.1 Cutting in several operations (Fig. 7) ................................................................... 8
8.2 Switching on and off (Fig. 8-9) .............................................................................. 8
8.3 Cutting direction .................................................................................................... 8
9 CLEANING, MAINTENANCE, AND LUBRICATION ..................... 9
10 TECHNICAL DETAILS .................................................................... 9
11 NOISE .............................................................................................. 9
12 WARRANTY .................................................................................. 10
13 ENVIRONMENT ............................................................................ 10