To Next PageTo Next PageWhat to do if my Powersmart PS76138A Saw unit shuts off abruptly?
If your Powersmart Saw shuts off abruptly, it might be due to the battery pack reaching its maximum thermal limit. To resolve this, allow the battery pack to cool down. Alternatively, the battery may be out of charge. Place it on the charger and allow it to charge.
Why my Powersmart PS76138A Saw unit will not start?
If your Powersmart Saw unit won't start, it could be due to a couple of reasons. First, check the battery pack installation to ensure it is properly installed. Second, verify the battery pack is charged and address charging requirements as needed.
How to troubleshoot Powersmart Saw battery pack that will not charge?
If the battery pack for your Powersmart Saw won't charge, there are a few potential causes. Ensure the battery pack is fully inserted into the charger until the LED indicator appears. Also, check that the charger is properly plugged into a working outlet. Finally, the surrounding air temperature might be too hot or too cold. Move the charger and battery to an environment where the air temperature is above 40 degrees F (4.5°C) or below 105 degrees F (+40.5°C).
Keep work area clean, avoid explosive atmospheres, and keep bystanders away.
Guidelines for safe use regarding plugs, grounding, water, and cords.
Advice on staying alert, using safety equipment, proper dress, and avoiding accidental starts.
Rules for handling the tool, workpiece, blades, and overhead cutting.
Warning to always wear proper hearing protection during use.
Mandatory use of safety glasses, dust masks, and respiratory protection.
Alerts about chemicals in dust known to cause cancer or reproductive harm.
Warning about potential injury from prolonged vibration exposure.
Advice on workpiece support, blade selection, and proper cutting techniques.
Explanation of kickback causes and methods to resist its force.
Instructions for checking and operating the retractable lower blade guard.
Guidelines for safe operation and use of the laser pointer.
Instructions for unpacking the power tool and checking contents against the list.
Step-by-step guide for safely installing and removing the saw blade.
Guidance on attaching the dust extraction adapter to the tool.
Instructions on how to set the blade's cutting depth for various materials.
Steps for setting the bevel angle for angled cuts.
Procedures for starting and stopping the circular saw.
General| Brand | Powersmart |
|---|---|
| Model | PS76138A |
| Category | Saw |
| Language | English |
