TROUBLE SHOOTING
The following form lists the common operating system with problem and solutions. Please read the form
carefully and follow it.
Motor fails to start when
switch trigger is
depressed.
Check power button
Push button.
Replace spool
1. Check line is not tangled or jammed in
the spool.
2.Remove the line and replace the spool
of the line and ensure the mechanism is
Poor cutting performance
Check the cutting line
1. Check the cutting line is fully
extended.
If not:
2. Manually extend the line or stop and
start the trimmer until the line has
been extended to the line cutter.
3.Make smaller cuts, This is a light
duty trimmer.
4.Ensure line is fully extended.
To Next Page
Loading...
