EasyManua.ls Logo

PowerSmith PWL2042TS User Manual

PowerSmith PWL2042TS
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PWL2042TS
4200 LUMEN
DUAL-HEAD LED WORK LIGHT WITH TRIPOD
Operator's Manual
SAVE THIS MANUAL FOR FUTURE REFERENCE
WARNING: To reduce the risk of injury, user must read and understand this
operator's manual before operating this tool.
888-552-8665
TOLL-FREE
HELP LINE:
WWW.POWERSMITHTOOLS.COM
Question and Answer IconNeed help?

Do you have a question about the PowerSmith PWL2042TS and is the answer not in the manual?

PowerSmith PWL2042TS Specifications

General IconGeneral
ModelPWL2042TS
CategoryWork Light
Lumens2000
Light TypeLED
Color Temperature5000K
Voltage120V
ColorBlack

Summary

Important Safety Instructions

Caution: Risk of Electric Shock

Do not use with extension cord near water. Keep work light at least 16 feet from pools and spas.

Warning: Fire, Electric Shock, Personal Injury

Use GFCI protection, outdoor extension cords, avoid looking directly at lamps, keep away from flammable surfaces.

Specifications

Knowing Your Work Light

Unpacking and Content

Assembly Instruction

Attaching Work Light Heads to Stand

Secure work light heads to the stand using locking knobs, washers, and hang the power cable splitter on the hook.

Adjusting the Tripod

Loosen tripod locking knob, extend legs, adjust height by loosening twist collars and tightening.

Attaching Work Light Assembly to Tripod

Place work light assembly on tripod and secure using the bracket locking system.

Operation

Adjusting the Light Direction

Loosen side locking knob, adjust head to desired position, and retighten knob.

On/Off Switch

Each work light head has an ON/OFF switch on the back. Press once to turn on, second time to turn off.

Maintenance

Warranty

Help Line

Related product manuals