To Next PageTo Next PageWhy does the workpiece lift up from the sanding disc/table when using my PowerTec Sander?
The workpiece may lift up from the sanding disc/table when using your PowerTec Sander if you are sanding on the “up” side wheel. Sand on the right side of the sanding disc as the operator faces the disc.
Guidelines for appropriate apparel and personal alertness during operation.
Instructions for maintaining a clean, well-lit, and safe work environment.
Best practices for safe and effective use of the tool.
How to align the sanding belt to track correctly on the wheels.
Guidance on securely attaching the sander to a workbench or stand.
Essential safety information regarding proper electrical grounding.
Proper method for holding workpieces during belt sanding.
Techniques for sanding small ends and curved edges with the disc or belt.
Routine inspections for damage, wear, and proper part alignment.
General