Need help?Do you have a question about the POWERTECH PLUS MB-3613 and is the answer not in the manual?
General| Output Voltage | 12V/24V |
|---|---|
| Protection | Overcharge, Short Circuit, Reverse Polarity |
| Battery Type | Lead-Acid |
| Charging Stages | 3-stage |
| Charging Time | Varies depending on battery capacity |
| Compatible Battery Types | GEL, AGM |
| Input Voltage | 220-240V AC |
Specifies voltage requirements and compatible battery types (lead-acid, LiFePO4).
Warns against non-rechargeable batteries, advises on equipment disconnection, ventilation, and cord safety.
Details connecting positive/negative terminals and AC power. Includes spark warning.
Outlines the correct reverse order for disconnecting the charger and battery.
Describes the 9-stage smart charger's technology, efficiency, and protection features.
Lists automatic voltage identification, 9-stage principle, charging modes, LCD display, prompts, buttons, and IP65 rating.
Identifies key external components: DC/AC cables, MODE button, indicator lights, and LCD screen.
Details indicators for reverse connection, wrong battery, analog/digit displays, and various charging modes.
Explains 'Bad Battery Detection' and 'Devulcanisation' stages of the charging process.
Describes the Pre-Charge, Constant Current, and Constant Voltage phases of the 9-stage charging process.
Explains the Recondition mode and the automatic Voltage Analysis function.
Details the maintenance 'Float Charge' and the 'Pulse Charge' stages for battery upkeep.
Presents a graphical overview of the 9 charging stage profiles.
Explains the charger's memory function during power outages and lists available charging modes.
Details safety protections (short circuit, polarity, overheat) and how to operate the MODE button.
Lists technical details: AC voltage, frequency, current, stages, battery types, capacity, memory, and IP rating.
Provides a guide to common error codes (Er1-Er5, buzzer/light) and their recommended solutions.
To Next Page
