10
CONNECTION DC-DC CHARGER:
The 12V BATTERY BOX includes a built-in DC-DC Charger suitable for charging
from a vehicle alternator.
The easiest way to connect the Power Station to your vehicle is by using the Plug &
Play Wiring Kit (sold separately).
The triple High Current connector fitted to the Battery Box interfaces with the Plug
& Play Wiring Kit, providing a simple, quick release vehicle charging solution. This
triple connector and cable provides alternator power to the DC-DC on the Power
Station, along with an Ignition Source for charging in vehicles that are fitted with
Smart or Temperature Compensating Alternator.
To Next Page
Loading...
