PowerWalker BlueWalker - User Manual

BlueWalker Solar PowerBank Quick Guide
Version: 1.0
Thank you for purchasing this product. This is a portable lighting solution. It is specifically
designed to provide lighting and power solutions to remote areas where no electricity exists.
It can be easily adapted for the various environments such as garages, barns, sheds,
gazebos, green house and boat docks.
Product Overlook
1. Main power switch
2. Built-in LED (only available for SL1 model)
3. Built-in LED (only available for SL2 model)
4. Lamp connectors
5. PV input
6. USB output port
7. Control button for right lamp
8. Control button for left lamp
9. Micro USB port
10. Control button for USB output
11. Power on: green lighting
Low battery: green flashing
Fault: Red lighting
12. Battery charging: red lighting
Full battery: green lighting
1. Inspection
The following items are inside the box:
 Power pack
 Lamp with holder and cable x 2pc
 Solar panel with cable
Remove all items from its package and inspect it for damage that may have occurred during
shipping. If any damage is discovered, re-pack the unit and return it to the place of
purchase.
2. Charging
Before first use, please be sure to charge the battery fully. You can charge battery from
either solar panel or micro USB.
Charged by solar panel: Simply connect solar panel to “PV IN “ marked on power pack and
place the power pack and lamps in the shaded place, where avoid exposing to sunshine
directly and away from moisture.
Charged by micro USB: Simply use a micro USB power adapter to connect Utility and the
micro USB connector marked with “5V IN”.
3. Connect to the Outputs
There are two kinds of output connectors for different devices. Please follow below
instructions to connect suitable loads to the power pack.
Two Lamps with Holders
Plug in the bundled lamp cable on the top of power pack.
Mobile Charging
There are two USB output ports for mobile device charging. Simply connect mobile devices
to USB output marked with “5V OUT”.
Initial Startup & Operation
Product Overview

Summary

Product Overview

Product Overlook

Details the physical components of the solar power bank, including the main power switch, LEDs, and ports.

Initial Startup & Operation

Inspection

Instructions for checking the package contents and inspecting for any shipping damage.

Charging

Explains how to charge the battery using the solar panel or a micro USB connection.

Connect to the Outputs

Guides on connecting lamps and charging mobile devices via USB output ports.

Important Safety Warnings

Safety Precautions

Provides essential safety precautions for using the solar lighting system, including sun exposure, storage, and handling.

Operation

Lamp and LED Operation

Details how to turn on and control the lamps and built-in LED using the main power switch and control buttons.

USB Output Operation

Explains how to activate the USB output port for charging mobile devices, independent of the main switch.

PowerWalker BlueWalker Specifications

General

Brand	PowerWalker
Model	BlueWalker
Category	Accessories
Language	English