10 PowerXL Grind & Go Plus
™
Making Coffee with Pre-Ground Beans
1. Open the Water Reservoir‘s lid and pour in
water, using the water level indicator on the
Water Reservoir to measure the water according
to the number of cups desired (Fig. A).
NOTE: The appliance uses all the water in the
Water Reservoir. Ensure that you do not add more
water than your desired cup size.
2. Insert the Filter Basket in the Carafe. Add 2 tbsp.
of ground coffee (1 scoop) for every 8 oz of water.
More ground coffee can be added for a stronger
avor. Be sure not to exceed the maximum of
8tbsp. (4 scoops). Place the grinder blade over
the lter basket. This allows the water to distribute
evenly over the grounds.
3. Slide the Carafe into the appliance and twist so that
the handle aligns with the lock symbol. If the Carafe
is placed properly, it will click into place (Fig. C).
4. Press the Power button on the Control Panel to turn
the appliance on. The Power button will illuminate.
5. Press the Brew button to brew coffee. The Brew
button will illuminate. When the appliance is done
brewing coffee, three beeps will sound and the
appliance will power off.
6. We do not recommend using nely ground coffee
or espresso grind because the grounds might clog
the lter.
Instructions for Use
Beans
Scoops/Tbsp
Water/Strength
1 scoop (2 tbsp) 8 oz water = regular (level 2); 12 oz water = lite (level 1)
1.5 scoops (3 tbsp) 8 oz water = strong (level 3); 12 oz water = regular (level 2)
2 scoops (4 tbsp) 8 oz water = very strong (level 4); 12 oz water = strong (level 3); 16 oz water = regular (level 2)
2.5 scoops (5 tbsp) 12 oz water = strong-Very strong (level 3-4); 16 oz water = regular – strong (level 2-3)
3 scoops (6 tbsp) 16 oz water = strong – very strong (level 3-4)*
4 scoops (8 tbsp) MAX 16 oz water = very strong (level 4)*
*If you have a 32 oz container, run a second time with the same ground beans and another 16 oz water
in Brew mode, and mix for regular-strong brew (32 oz).
To Next Page
Loading...
Need help?
General
