Need help?Do you have a question about the PowMr POW-HVM2K-12V and is the answer not in the manual?
General| Model | POW-HVM2K-12V |
|---|---|
| Rated Power | 2000W |
| Input Voltage | 230 VAC |
| Frequency Range | 50 Hz/60 Hz (Auto sensing) |
| Output Voltage Regulation | 230 VAC ± 5% |
| Output Voltage | 230 VAC |
| Surge Power | 4000W |
| Efficiency (Peak) | 93% |
| Waveform | Pure sine wave |
| Battery Voltage | 12 VDC |
| Floating Charge Voltage | 13.5 VDC |
| Overcharge Protection | 15 VDC |
| Maximum PV Array Power | 1000W |
| Maximum Solar Charge Current | 50 A |
| Maximum AC Charge Current | 20 A |
| Maximum Charge Current | 70 A |
| Protection Features | Overload, Short Circuit, Over Temperature |
| Humidity | 5% to 95% Relative Humidity (Non-condensing) |
| Selectable Voltage Range | 170-280 VAC (For Personal Computers), 90-280 VAC (For Home Appliances) |
| Transfer Time | 10 ms (For Personal Computers), 20 ms (For Home Appliances) |
| PV Array MPPT Voltage Range | 30V-80V |
| Charging Stages | 3 Stages |
| Battery Type | Lithium |
| Operating Temperature | 0°C - 55°C |
| Storage Temperature Range | -15°C ~ 60°C |
| Cooling | Fan |
Details the inverter's operational modes, including inversion and electric supply priorities.
Explains the different phases of battery charging, from bulk to float and equalization.
Describes the front panel controls, indicators, and LCD display functions.
Covers initial settings: exit mode, output priority, input voltage, power saving, and battery types.
To Next Page
