Need help?Do you have a question about the Powrmatic HEMSL 200-24 and is the answer not in the manual?
General| Input Voltage | 200-240 VAC |
|---|---|
| Frequency | 50/60 Hz |
| Output Voltage | 24 VDC |
| Power | 200 W |
| Storage Temperature | -20°C to +85°C |
| Protection | Overload, overvoltage, short circuit |
| Cooling | Convection |
| Safety Standards | EN 60950-1, UL 60950-1 |
Terms and requirements for the product guarantee to be valid.
Requirements for the unit's electrical connection and safety.
Guidelines for gas installation, pipework, and pressure.
Requirements for connecting air intake and flue systems.
Procedures for gas installation, testing, and purging.
Safety warnings and requirements for electrical connections.
Checks to ensure electrical safety and correct installation.
Pre-lighting checks for safe operation.
Steps for initiating and confirming burner ignition.
Setting and checking burner gas pressures for optimal heat input.
Procedure for adjusting high and low fire settings on the regulator.
Steps for adjusting modulating gas pressures.
Steps for safely removing the main burner assembly for servicing.
Troubleshooting steps for a non-operational exhaust fan.
Diagnosing and resolving issues with spark ignition.
Troubleshooting steps when the burner fails to ignite.
To Next Page
