Tube, Accu, & Calibration
Choose ‘
Tube
’ you want to calibrate in the ’Tube’ menu (A-J)
Up to 10 calibrations can be stored
Before each infusion, be sure the correct ’
Tube
’ appears in
the top left corner so that the correct infusion settings are
used
When calibrating we strongly recommend using a gram
scale that measure in 0.1g increments or a graduated
cylinder when fine tuning motor speed. If you do not have
either of those tools, infuse into a container and draw up
fluid infused with a syringe, or connect a female/female
transfer device to the male end of your admin set and a
syringe.
The ‘Accu’ Screen
To Next Page
Loading...