practyl HF-CS02-185T - Technical Specification; Using the Circular Saw

30
7
、
Marking for bevelled cuts 45°
8
、
Marking for straight cuts
9
、
Fixing screw for parallel guide
10
、
Parallel guide
11
、
Fixing screw for saw blade
12
、
Riving knife
13
、
Blade cover
14
、
Chip ejector
15
、
Fixing screw for cutting depth
8
、
TECHNICAL SPECIFICATION
voltage
230-240V~50HZ
Rated
power
1200W
No-load
speed
5000/min
Max. Cutting depth at 90° 63mm
Max. Cutting depth at 45° 38mm
Saw blade

185mm
Sound pressure level(L
pa
)
99,5dB(A); K=3 dB(A
Sound power level(L
wa
)
110.6 dB(A);K=3 dB(A
Vibration
emission
value:
K=1.5
m/s
²
Main
Handle
3.26
m/s
²
Auxiliary handle 3.5 m/s²
- that the declared vibration total value has been measured in accordance with
a standard test method and may be used for comparing one tool with another
- that the declared vibration total value may also be used in a preliminary
assessment of exposure
A warming:
- that the vibration emission during actual use of the power tool can differ from
the declared depending on the ways in which the tool is used
To reduce vibration risk
-wear anti-vibration gloves
-shorten trigger time
Warning!
Be sure to wear and safety goggles, dust-mask and
ear-protection during operation!
9
、
USING THE CIRCULAR SAW