Need help?Do you have a question about the Pragati BTP-63 and is the answer not in the manual?
Procedure to adjust the coolant ring for proper flow.
Steps to replace the coolant valve button without removing the tool disc.
General points for selecting control system and program for turret operation.
Essential safety interlocks for turret operation and fault handling.
Facilities available for controlling the turret in manual mode.
Comprehensive list of spare parts with part numbers and references.
Step-by-step guide for dismantling turret mechanical components.
Specific instructions for dismantling the disc spring and drum-cam.
Guidance for inspecting key mechanical components for wear or damage.
Steps for assembling the spindle and its sub-assemblies.
Steps for assembling the indexing cam drive components.
Procedure to assemble spindle and indexing drive into the main body.
Final steps to complete the turret assembly process.
Step-by-step guide to adjust Ringfeder clamps after an accident.
List of Group A spares, typically costly components.
List of Group B spares, typically rubber seals.
List of Group C spares, for periodic inspection.
List of Group D spares, for coolant valve components.
To Next Page
General