To Next PageTo Next Page
Need help?Do you have a question about the prana 150 STANDART and is the answer not in the manual?
Details the 'Mini heating up' function for comfort and air curtain effect.
Explains the 'Winter Mode' function to prevent condensate drainage icing.
The PRANA recuperator is a bidirectional ventilation unit designed to create and maintain a healthy microclimate in various premises. It operates on the principle of countercurrent heat exchange with a continuous thermal cycle, utilizing a copper heat exchanger. This design allows for two distinct airflows within a single cylinder, ensuring no mixing of incoming fresh air and outgoing exhaust air.
The core function of the PRANA recuperator is to recover heat from the exhaust air and transfer it to the incoming fresh air from outside. This process significantly increases the overall recuperation rate and helps maintain optimal humidity levels within the room. The high velocity of the airflow, combined with efficient heat transfer, also facilitates the removal of up to 90% of moisture in a dispersed state, preventing condensation and freezing of the heat exchanger even at low ambient temperatures.
The system is a monoblock, ready for use according to design and assembly tasks. It is suitable for both residential and public facilities, including apartments, houses, office premises, educational establishments, and kindergartens.
The PRANA recuperator offers several operational modes and features for enhanced comfort and efficiency:
The system is controlled via a remote control or a mobile application, allowing users to turn on, regulate, and turn off the fans. The PRANA 150 / 200G / 200C recuperators automatically adapt to the connected voltage, reducing noise and ensuring declared noise characteristics.
The PRANA recuperators come in several models, including PRANA-150, PRANA-200G, and PRANA-200C, with ERP LITE and ERP PRO variants.
| Specification | PRANA 150 | PRANA 200G | PRANA 200C |
|---|---|---|---|
| Working module diameter (with insulation) | 150 mm (160 mm) | 200 mm (210 mm) | 200 mm (210 mm) |
| Mounting hole diameter | ≥162 mm | ≥215 mm | ≥215 mm |
| Working module length | ≥450 mm | ≥440 mm | ≥500 mm |
| Recommended area | <60 m² | <60 m² | <120 m² |
| Air exchange (inflow/exhaust) | 105/97 m³/h | 108/100 m³/h | 185/177 m³/h |
| Night/minimal air exchange | 12 m³/h | 12 m³/h | 21 m³/h |
| Passive mode air exchange | 6 m³/h | 10 m³/h | 10 m³/h |
| Energy consumption (recuperator) | 4-17 W·h | 4-17 W·h | 4-35 W·h |
| Energy consumption ("mini-after-heating") | 51 W·h | 51 W·h | 56 W·h |
| Recovery efficiency | 95% | 96% | 93% |
| Acoustic pressure (3m/1m) | 14/52 dB (A) | 13/50 dB (A) | 15/54 dB (A) |
| Weight (individual packing) | ≥ 4.3 kg | ≥ 5.8 kg | ≥ 6.0 kg |
| Packing box size (LxHxW) | ≥750x210x210 mm | ≥750x260x260 mm | ≥750x260x260 mm |
The system is mounted in a hole in the upper part of the wall, 100-150 mm from the ceiling or walls. The hole should have a slope of 3-5 degrees towards the outside. The working module's length should match the wall thickness, with 1-2 cm extending beyond the wall for the air intake.
Maintenance involves periodic inspection (recommended 1-2 times a year) and cleaning of the fans and heat exchanger.
The manufacturing process includes 100% inbound quality control for all components, double 100% inbound control after manufacture, and a 24-hour run in maximum performance mode.
Units should be transported and stored horizontally in individual packing boxes. Store in factory packaging under cover or in an enclosed space with relative humidity no more than 70% and air temperature from -20°C to +40°C.
General| Brand | prana |
|---|---|
| Model | 150 STANDART |
| Category | Air Conditioner |
| Language | English |
