Need help?Do you have a question about the Pratissoli MW Series and is the answer not in the manual?
General| Model | MW Series |
|---|---|
| Category | Water Pump |
| Inlet Port Size | Varies by model (e.g., 1-1/2" NPT, 2" NPT) |
| Discharge Port Size | Varies by model (e.g., 3/8" NPT, 1/2" NPT) |
| Pump Type | Triplex Plunger Pump |
| Power Source | Electric Motor or Engine |
| Inlet Size | Varies by model (e.g., 1-1/2" NPT, 2" NPT) |
| Outlet Size | Varies by model (e.g., 3/8" NPT, 1/2" NPT) |
| Frequency | 50/60 Hz |
Step-by-step guide for disassembling the mechanical components of the pump.
Instructions for reassembling the mechanical parts of the pump after repair.
Details on reduction classes for bend shafts and con-rod half-bearings.
Guide to dismantling valve units in the MW32, MW36, and MW40 pump heads.
Procedure for dismantling valve units in the MW45, MW50, and MW55 pump heads.
Steps for assembling valve units in the MW45, MW50, and MW55 pump heads.
Procedure for dismantling and inspecting seals within the piston unit.
Instructions for reassembling the piston unit seals following disassembly.
To Next Page
