• 1/8 DIN Loop-Powered Process Meters with NEMA 4X, IP65 Front
• 4-20 mA Input Displayed with ±0.02% FS Accuracy
• 1.5 Volt Drop (4.5 Volt Drop with Backlight)
• 0.7" (17.8 mm) 5 Alphanumeric Characters Top Display
• 0.4" (10.2 mm) 8 Alphanumeric Characters Bottom Display
• 20-Segment Bargraph with Numeric Percent Indication, Optional
• Shallow Depth Case Extends Only 3.6" (91 mm) Behind Panel
• (2) Open Collector Outputs Standard; Assigned to Pulse, Alarm, Timer, or Stopwatch
• (2) Optional Loop-Powered Solid State Relays; Assigned to Alarm, Control, Timer, or Stopwatch
• Stopwatch & Timer Functions to Drive Relays & Open Collectors
• Optional Isolated 4-20 mA Analog Output
• Relay Pump Alternation Based on Level and Runtime
• Display Relay Runtime & Cycle Count via Relay Info Menu
• Round Horizontal Tank Function; Just Enter Diameter & Length
• 32-Point Linearization, Square Root Extraction and Programmable Exponent Function
• Free PC-Based MeterView XL USB Programming Software
• HART
®
Protocol Transparent
• Loop-Powered Backlight with Red Backlight for Alarm Conditions
• Safe Area Operating Temperature Range: -40 to 167°F (-40 to 75°C)
• Conformal Coated PCBs for Dust & Humidity Protection
• Password Protection
• UL & C-UL 61010 Listed for Electrical Safety
• UL & C-UL Listed as Intrinsically Safe and Nonincendive
• ATEX and IECEx Certified as Intrinsically Safe
• Wide Assortment of NEMA 4X Enclosures for up to Ten Meters
• Light / Horn & Reset Button Accessory
• Control Station Accessory for Remote Operation of Digital Input
• 3-Year Warranty
To Next Page
Need help?
General
