WARNING:FAILURE TO FOLLOW THESE RULES
MAY RESULT IN SERIOUS PERSONAL INJURY
As with all machinery there are certain hazards involved with operation and
use of the machine. Using the machine with respect and caution will
considerably lessen the possibility of personal injury. However, if normal
safety precautions are overlooked or ignored, personal injury to the operator
may result.
This machine was designed for certain applications only. We strongly
recommends that this machine. NOT be modified and/or used for any
application other than for which it was designed. If you have any questions
relative to its application DO NOT use the machine until you have had detail
instruction from your dealer.
SAFETY RULES FOR ALL TOOLS
1.FOR YOUR OWN SAFETY ,READ THIS INSTRUCTION MANUAL BEFORE
OPERATING THE TOOL. Learn the tool's application and limitations as well
as the specific hazards peculiar to it.
2.KEEP GUARDS IN PLACE and in working order .
3.GROUND ALL TOOLS .If tool is equipped with three-prong plug, it
should be plugged into a three-hole electrical receptacle. If an adapter is
used to accommodate a two-prong plug receptacle, the adapter lug must
be attached to a know ground. Never remove the third prong.
4.REMOVE ADJUSTING AND WRENCHES.
Form habit of checking to see that keys and adjusting wrenches are
removed from tool before turning it"on."
5.KEEP WORK AREA CLEAN. Cluttered areas and benches invite
accidents.
6.DON'T USE IN DANGEROUS ENVIRONMENT .Don't use power tools in
damp or wet locations, or expose them to rain. Keep work area well- lighted.
7.KEEP CHILDRE AND VISITORS AWAY. All children and visitors should be
keep a safe distance from work area.
8.MAKE WORKSHOP CHILDROOF -with padlocks, master switches, or
by removing starter keys.
9.Don't force tool. It will do the job better and be safer at the rate for which
it was designed.
10.USE RIGHT TOOL .Don't force tool or attachment to do a job for which
it was not designed.
To Next Page
Loading...