FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Sequenced Delays Eliminate Residual Power-Up/Power-Down Pops.
Differential RCA Inputs Isolate 12V/Audio to Ground, Eliminating Ground Loops and
Noise.
Full Signal Path Low Noise/Distortion Circuitry Topology.
Optimal Component Layout for Minimal Distortion Induction & Signal Separation.
Triple Darlington Audio Output Stages
Differential Drives Divide Pre-Amp & Power-Amp Stages, Eliminating Ground Looping
Full Differential Feedback Surrounding Power-Amp Stages directly from Speaker Ter-
minals resulting in Uncolored Sound Reproduction and Elimination of Ground Loops
Output Stage Bias Individually Sequenced, Optimizing Sound Quality
Stout 2 Oz. Copper Traces Effortlessly Transfer High Volume Internal Current
Close Tolerance Signal Path Components - 1% Resistors & 5% Capacitors
Large TO218 MOSFET Transistors
High Volume, Low ESR Capacitance Banks Compensate Power Supply Ripple Cur-
rents
Extra Low Current Drive Stage Increases Efficiency & Sound Clarity
Individually Regulated Preamp/Crossover Power Supplies Ensure Signal Purity
Separated Capacitor Charging/Discharging Current Paths Prevent Rail Switching
Spikes & Ground Traces from Entering Signal Stages Resulting in Distortion
To Next Page
Loading...