9
2. Wire the positive (+) terminals of the speakers to the positive (+)
terminal on the amplifier. Wire the negative (-) terminals of the
woofers to the negative (-) terminal on the amplifier.
3. This wiring show the amplifier a 2 ohm load.
Technical Brief:
How to properly wire a PPI woofer in series to a PPI amplifier for
maximum power and performance.
1. Wire the woofer's coils together in series by wiring the positive of
one coil to ther negative of the other coil. This is series wiring.
2. Wire the two open terminals to the amplifier, positive terminal
to the amplifier positive and negative terminal to the amplifier
negative.
3. This wiring show the amplifier a 8 ohm load.
To Next Page
Loading...