how to use how to use
3 4
Look through the eyepiece and press the
power button to turn on the rangefinder.
The aiming circle will appear in the middle
of the screen.
1. Rotate the dial left or right on the adjustable
eyepiece until the display appears
sharply focused.
2.
Point the aiming circle at the target -- flag,
tree, bunker, etc. Then press and release the
POWER button to “shoot your target.”
3. If slope is on, the slope-adjusted number
will appear above the aiming circle. The
non-slope number will appear below the
aiming circle.
4.
To Next Page
Loading...
