EasyManuals Logo

Precision PCF15 User Manual

Precision PCF15
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
- 3 -
General Hazards
All moving parts of the Blast Chiller are suitably guarded, and the moving parts can only be
accessed by using tools which should only be attempted by a qualified person.
Electrical Connection
PCF15 & PCF40 is supplied with a molded 13 Amp plug which needs a suitable socket.
PCF50 requires dedicated 16 Amp supply. This cabinet should not be used outside and
should be used in a dry environment. The plug needs to be accessible once the equipment
is placed in its final position. Should the plug need changing, this must be done by a
qualified person.
Unpacking
Leave all packaging in place until blast chiller is in its final position to avoid damage. When
the cabinet is in its final position, carefully remove all packaging and check for damage.
Any damage should be reported immediately to your dealer. All packaging should be
carefully disposed of and recycled where possible.
Installation
The cabinet is very easy to move around as precision blast chillers are supplied on castors
as standard. If for any reason the cabinet has to be laid down, it should always be laid on
its back and not its side or front to avoid damage. When lowering or raising the cabinet
extreme care should be taken as the castors can run away whilst lifting or lowering. A
person should always be standing at the base of the cabinet whilst it is being lowered or
raised. Cabinet should not be plugged in for at least 1 hour if it has been laid down or
tipped during installation.
This product must be placed on a level floor to ensure the automatic door closing and
correct draining of condensate.
Ventilation
Refrigeration equipment, and Blast Chillers in particular, generates a lot of heat. A Blast
Chiller gives off the same heat as a large electric heater. Therefore, it is very important
that it must be installed with sufficient space around it for ventilation and for maintenance
access. Ventilation grills must not be blocked, or even partially blocked as this could affect
the cabinetʼs performance and life span.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Precision PCF15 and is the answer not in the manual?

Precision PCF15 Specifications

General IconGeneral
BrandPrecision
ModelPCF15
CategoryFreezer
LanguageEnglish