Alarms:
Press to see details of any recent errors
Engineer Settings:
Press to access engineering mode to modify any setting. Please note this area is
password protected for engineer’s use only. Contact factory for password.
Maintenance
The Blast Chiller / Freezer is fully automatic and, apart from cleaning needs very little
maintenance.
Interior and exterior should be cleaned with soap and water and no abrasives should be
used as they will scratch and spoil the stainless steel finish. Interior shelving and racking
can be removed for easy cleaning.
Maintenance and Cleaning
Before cleaning and maintenance, the cabinet should be in standby mode then unplugged
from the power supply.
Door Gaskets should be cleaned with warm soapy water and inspected on a regular basis
and if damaged they should be replaced. Cooking oils and harsh cleaning detergents will
shorten the life of the gaskets and contact should be avoided.
To Next Page
Loading...
General