Precor 100i - Changing the Units of Measure; Selecting a Language

Changing the Units of Measure
Display measurements can appear in either Metric or U.S.
Standard. To change this setting, perform the following steps:
1.
2.
3.
4.
1.
2.
3.
4.
Press UNITS/LANG. The word UNITS appears on the display.
Press OK. UNITS scrolls across the display and is replaced by
one of two options: U.S. or METRIC .
Toggle between the two options by pressing the down arrow
key on the navigational keypad.
When you are ready, press OK to select the displayed unit of
measure. A message scrolls across the display indicating that
the unit of measure has changed.
Selecting a Language
You can choose to display text messages in several different
languages. To select a different language before or during an
exercise session, take the following steps:
Press UNITS/LANG. Press the key a second time and
LANGUAGE appears and scrolls across the display.
Note: When you press the UNITS/LANG. key a third time, you
exit the menu and return to the Precor banner. The center
display appears blank. To reenter the menu, press
UNITS/LANG. again.
While LANGUAGE scrolls across the display, press OK to
select it.
Scroll through the available language options by continually
pressing the down key on the navigational keypad.
When you are ready, press OK to select the displayed
language. A message scrolls across the display indicating that
the language has been changed.
User's Reference Manual: Exercise Session 36