32 Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 883 / 833 / 813
To tighten the handlebars completely:
1. Use the wrench included with the unit, or a 1³₈-inch
socket, box, or open-end wrench, to tighten the handlebar
screws fully.
2. Use a ³₁₆-inch hex wrench to tighten the two handlebar
clamp fasteners fully.
3. Insert the center crossbar cap for each handlebar and
press firmly into place.
Figure 17: Center crossbar cap attachment
Note: When secure, the center crossbar caps hold the lift
cover in place.
4. Attach the outer handlebar caps.
Figure 18: Outer handrail caps attachment
To Next Page
Loading...
