Precor P82 - Page 2

Install the console based on the information on the other side of this sheet.
Verify that the Ethernet patch cables from the floor or wall cannot become caught on the equipment’s moving components.
Verify these motion control operations work:
• Elevation and speed
• Resistance (Bikes, EFX, AMT)
Update the software and all videos for the Workout Guides videos, as necessary.
Scan TV channels.
1. Verify that available channels match the channel list.
2. Rename the channels if necessary.
3. Set the default channel, if applicable.
Touch GO, then verify these operations:
• Channel up/down controls
• Volume up/down controls
• Channel changes on the channel list
• USB connection (only for charging a personal media player)
• Headphone jack
• STOP button and emergency stop lanyard (TRM only)
Verify that the heart rate display works:
1. Begin exercising on the equipment and grasp both touch-sensitive handlebars. The heart icon flashes while the heart rate is read.
You must maintain contact with both metal plates on each handlebar to ensure an accurate reading.
2. Within ten seconds, your heart rate number appears in the HEART RATE (HR) display. If a number does not appear, perform the
following checks:
• Verify that the HR cable is properly connected.
• Repeat the test with a dierent person. In rare instances, it may not work properly for a few individuals.
• Repeat this test using a chest strap or a wireless pulse simulator. You’ll get better results than if you only grasp the touch-
sensitive handlebars. DO NOT hold onto the handlebars during the reading or you’ll override the HR results.
Verify IP connectivity, then register the equipment. Make sure you have this info:
• Location code
• Precor technician account name and password
• Serial number from the base
• Friendly name assigned to the equipment by the facility (Example: Equipment Type-Floor-Row-Number)
To complete registration for Preva-networked facilities:
1. Enter the Preva server name (na.preva.com for all sites).
2. Enter the assigned account name and password.
3. Follow the onscreen instructions to register the product.
Ask the facility’s Preva administrator to log on to Preva Business Suite and confirm that all P82-based equipment appears there.
To test that the console and equipment are working:
Use this checklist of procedures for testing and follow each step in order.
P82 Installation Guide | P/N 304009-102 rev B, ENU
©2016 Precor Incorporated. An Amer Sports brand. | January 2016