EasyManua.ls Logo

Precor Smith Machine 802 User Manual

Precor Smith Machine 802
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owners Manual
Discovery Plate Loaded™ Line
Question and Answer IconNeed help?

Do you have a question about the Precor Smith Machine 802 and is the answer not in the manual?

Precor Smith Machine 802 Specifications

General IconGeneral
Model802
TypeSmith Machine
BrandPrecor
Frame MaterialSteel
Linear BearingsYes

Summary

Important Safety Guidelines for Owners

Safety Approval

Precor commercial strength equipment is designed and tested according to EN 957-1/2 standards.

Important Safety Information for Users

Before You Begin

Recommended Tools

Lists essential tools for maintaining the equipment, including wrenches, hex keys, and a rubber mallet.

Obtaining Service

Contact Customer Support for information on service, serial numbers, or authorized service centers.

Maintaining Your Plate Loaded Equipment

Daily Maintenance

Tasks to perform daily: Clean upholstery, inspect pads, clean frames, check labels.

Clean Upholstery

Spray upholstery with mild soap and water solution; wipe dry. Avoid solvents, alcohol, ammonia, petroleum.

Inspect Upholstery Pads for Wear

Check pads for cracks, loose stitching, staples, or bolts. Replace if needed.

Clean and Inspect Frames

Clean frames with soap and water, dry thoroughly. Inspect for cracks, rust, or loose welds.

Check Warning and Instructional Labels

Inspect labels daily for legibility. Replace if damaged or unreadable. Clean with mild soap and water.

Weekly Maintenance

Condition and deep clean upholstery weekly with a lanolin-based cleaner.

Monthly Maintenance

Inspect Frames and Movement Arms

Inspect frames and arms for cracks, rust, or damage. Touch up paint and replace worn parts.

Inspect the Bearings and Bushings

Inspect bearings and bushings monthly for smooth operation. Contact Customer Support for replacements.

Check and Lubricate the Seat Adjustment

Check seat lever for sticking. Lubricate pivot pin with Teflon spray if needed.

Inspect All Fasteners

Inspect nuts, bolts, and screws for tightness and correct installation. Retighten or replace as needed.

Discovery™™ Series Plate Loaded Line Smith Machine Assembly Guide

Assembly Requirements

Assemble near use location, on a solid surface, with adequate space, and with assistance.

Hardware Kit

Lists components and quantities for the assembly hardware kit.

Attaching the Weight Bar

Instructions for attaching the weight bar assembly, including latching safety stops and securing brackets.

Attaching the Weight Storage Horns

Procedure to attach weight storage horns using bolts, washers, and bumpers.

Stabilizing the Equipment

Instructions for adjusting the adjustable foot to stabilize the unit on uneven surfaces.

Bolting the Equipment to the Floor

Recommendations and steps for bolting the equipment to the floor for stability, consulting contractors for proper methods.

Disassembling the Smith Machine

Step-by-step procedure for disassembling the Smith Machine, requiring assistance.