STOP
Starting Procedure
Mount Engine
4. PULL CORD 5. SLOWLY OPEN THROTTLE
Check engine for oil and
fuel on a flat surface.
If engine does not have the
recommended amount,
fill as shown below
Check engine fuel level
and add fuel to within
1" of the rim of the tank
1. PRESS PRIMER TWICE 2. CLOSE THROTTLE* 3. HOLD MOWER
HANDLES TOGETHER
Full level
Attach Cables To Brake
Arm And throttle
THROTTLE
CABLE
MOWER BRAKE
CABLE SHEATH
BRAKE
ARM
THROTTLE
CABLE SHEATH
*NOTE:
Location, operation
and design of
throttle may vary
BRAKE
BRACKET
IMPORTANT: Breaking-in the engine will help to ensure proper equipment and engine performance.
The operational break-in period will last about 3 hours of use. During this period: • Do not apply a heavy load
to the equipment • Do not operate the engine at its maximum speed.
To Previous Page
Loading...
Need help?
General
